• Micro-V
• Part No: 7PK2300
• Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
• Colour: Black
• Number of ribs: 7
• Width (mm): 24
• Length (mm): 2300
• Qty: 1pc

 

• Lasts Longer - Lasts up to 50% longer than any retail belt on the market.
• Ultimate Dependability - Eliminates belt noise and premature failure by utilising materials like Aramid Fibre found in bullet proof vests and crack and heat resistant EPDM materials.
• Improves Component Performance – Compensates for worn and misaligned components in high kilometre vehicles through superior stability.

 

• Suitable with:
• TOYOTA
• FORTUNER
•  Petrol 2.7L/120KW 2.7 (TGN166_, TGN168_) 2TR-FE _N15_,_N16_ Rear-Wheel Drive SUV (01/16-on)
•  Petrol 2.7L/122KW 2.7 VVT-i (TGN166_, TGN168_) 2TR-FE _N15_,_N16_ Rear-Wheel Drive SUV (01/17-on)
•  Petrol 2.7L/122KW 2.7 VVT-i 4x4 (TGN156_) 2TR-FE _N15_,_N16_ All-wheel Drive SUV (01/17-on)
•  Petrol 2.7L/116KW 2.7 (TGN61_) 2TR-FE _N5_,_N6_ Rear-Wheel Drive SUV (03/09-05/15)
•  Petrol 2.7L/118KW 2.7 (TGN61_) 2TR-FE _N5_,_N6_ Rear-Wheel Drive SUV (06/04-05/15)
•  Petrol 2.7L/118KW 2.7 4WD (TGN51_) 2TR-FE _N5_,_N6_ All-wheel Drive SUV (06/04-05/15)
•  Petrol 2.7L/116KW 2.7 VVT-i 4WD (TGN51_) 2TR-FE _N5_,_N6_ All-wheel Drive SUV (08/08-03/15)

 

• HILUX
•  Petrol 2.7L/120KW 2.7 Flex 4WD (TGN26) 2TR-FE _N1_,_N2_,_N3_ All-wheel Drive Ute (01/11-05/15)
•  Petrol 2.7L/118KW 2.7 (TGN16_) 2TR-FE _N1_,_N2_ Rear-Wheel Drive Platform/Chassis (02/05-on)
•  Petrol 2L/100KW 2.0 (TGN10, TGN15, TGN16) 1TR-FE _N1_,_N2_,_N3_ Rear-Wheel Drive Ute (06/05-05/15)
•  Petrol 2.7L/118KW 2.7 (TGN16) 2TR-FE _N1_,_N2_,_N3_ Rear-Wheel Drive Ute (08/05-05/15)
•  Petrol 2.7L/118KW 2.7 4WD (TGN26) 2TR-FE _N1_,_N2_,_N3_ All-wheel Drive Ute (08/05-05/15)

 

• HILUX REVO
•  Petrol 2.7L/122KW 2.7 (TGN111_, TGN121_, TGN136_) 2TR-FE _N1_ Rear-Wheel Drive Ute (05/15-on)

 

• HILUX VIGO
•  Petrol 2.7L/118KW 2.7 CNG (TGN16) 2TR-FE _N1_,_N2_,_N3_ Rear-Wheel Drive Ute (08/12-05/15)

 

• INNOVA
•  Petrol 2L/100KW 2.0 (TGN40_) 1TR-FE _N4_ Rear-Wheel Drive MPV (09/05-02/16)
•  Petrol 2L/102KW 2.0 VVT-i (TGN140) 1TR-FE _N14_ Rear-Wheel Drive MPV (11/15-on)
•  Petrol 2L/100KW 2.0 VVT-i (TGN140) 1TR-FE _N14_ Rear-Wheel Drive MPV (11/15-on)

 

• KIJANG INNOVA
•  Petrol 2.7L/118KW 2.7 (TGN41_) 2TR-FE _N4_ Rear-Wheel Drive MPV (12/04-07/07)

 

• Caution:
• Before any service work on the belt is begun to be sure that the motor or engine is switched off and cannot be started.

 

• Important:
• Check for worn tensioners and idler pulleys. This is the best time to replace these part these parts if needed.

 

• Belt Removal:
• Loosen adjustment or pivot bolts.
• Move adjustment unit to minimum position.
• Remove belt.

 

• Belt Installation:
• Place new belt looseley on pulleys. Do not pry onto pulleys.
• Tension belt according to manufacturer's instruction.
• Run drive 5 minutes and retension. Belts must be tight enough to prevent slippingwhen drive is fully loaded.
•  
• Reminders :
• Kindly note that actual product color may vary from the images shown.
• Lighting conditions at the time the photo was taken can also affect an image's color.
• For more questions about this product, please don't hesitate to message us.
• Thank you and happy shopping!