- Micro-V
- Part No: 7PK2050
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: Black
- Number of ribs: 7
- Width (mm): 24
- Length (mm): 2050
- Qty: 1pc
- Lasts Longer - Lasts up to 50% longer than any retail belt on the market.
- Ultimate Dependability - Eliminates belt noise and premature failure by utilising materials like Aramid Fibre found in bullet proof vests and crack and heat resistant EPDM materials.
- Improves Component Performance – Compensates for worn and misaligned components in high kilometre vehicles through superior stability.
- Suitable with:
- TOYOTA
- FORTUNER
- Diesel 2.4L/110KW 2.4 D 4x4 (GUN155_) 2GD-FTV _N15_,_N16_ All-wheel Drive SUV (01/16-12/21)
- Diesel 2.4L/110KW 2.4 D (GUN165_) 2GD-FTV _N15_,_N16_ Rear-Wheel Drive SUV (01/16-on)
- Diesel 2.4L/108KW 2.4 D (GUN165_) 2GD-FTV _N15_,_N16_ Rear-Wheel Drive SUV (01/16-on)
- Diesel 2.8L/128KW 2.8 D 4x4 (GUN156_) 1GD-FTV _N15_,_N16_ All-wheel Drive SUV (01/16-on)
- Diesel 2.8L/150KW 2.8 D (GUN166) 1GD-FTV _N15_,_N16_ Rear-Wheel Drive SUV (01/22-on)
- Diesel 2.8L/150KW 2.8 D 4x4 (GUN156) 1GD-FTV _N15_,_N16_ All-wheel Drive SUV (01/22-on)
- Diesel 2.8L/130KW 2.8 D (GUN166_) 1GD-FTV _N15_,_N16_ Rear-Wheel Drive SUV (05/15-on)
- Diesel 2.8L/130KW 2.8 D 4x4 (GUN156) 1GD-FTV _N15_,_N16_ All-wheel Drive SUV (05/15-on)
- HILUX
- Diesel 2.4L/110KW 2.4 D (GUN112_, GUN122_, GUN135_, GUN120_) 2GD-FTV _N1_ Rear-Wheel Drive Ute (03/19-on)
- Diesel 2.4L/108KW 2.4 D (GUN112_, GUN122_, GUN135_) 2GD-FTV _N1_ Rear-Wheel Drive Ute (05/15-on)
- Diesel 2.4L/110KW 2.4 D 4WD (GUN125_) 2GD-FTV _N1_ All-wheel Drive Ute (05/15-on)
- Diesel 2.4L/108KW 2.4 D 4WD (GUN125_) 2GD-FTV _N1_ All-wheel Drive Ute (05/15-on)
- Diesel 2.8L/130KW 2.8 D 4WD (GUN126_) 1GD-FTV _N1_ All-wheel Drive Ute (05/15-on)
- Diesel 2.8L/128KW 2.8 D 4WD (GUN126_) 1GD-FTV _N1_ All-wheel Drive Ute (05/15-on)
- Diesel 2.8L/150KW 2.8 D 4WD (GUN126) 1GD-FTV _N1_ All-wheel Drive Ute (06/20-on)
- HILUX REVO
- Diesel 2.8L/150KW 2.8 D (GUN136) 1GD-FTV _N1_ Rear-Wheel Drive Ute (05/20-on)
- Diesel 2.4L/110KW 2.4 D (GUN112_, GUN122_, GUN135_) 2GD-FTV _N1_ Rear-Wheel Drive Platform/Chassis (07/15-on)
- Diesel 2.8L/125KW 2.8 D (GUN123_, GUN136_, GUN123) 1GD-FTV _N1_ Rear-Wheel Drive Ute (07/15-on)
- INNOVA
- Diesel 2.8L/128KW 2.8 D (GUN143) 1GD-FTV _N14_ Rear-Wheel Drive MPV (11/15-on)
- Diesel 2.8L/126KW 2.8 D (GUN143) 1GD-FTV _N14_ Rear-Wheel Drive MPV (11/15-on)
- KIJANG INNOVA / INNOVA VENTURER
- Diesel 2.4L/110KW 2.4 (GUN142) 2GD-FTV _N14_ Rear-Wheel Drive MPV (11/15-10/2
- Caution:
- Before any service work on the belt is begun to be sure that the motor or engine is switched off and cannot be started.
- Important:
- Check for worn tensioners and idler pulleys. This is the best time to replace these part these parts if needed.
- Belt Removal:
- Loosen adjustment or pivot bolts.
- Move adjustment unit to minimum position.
- Remove belt.
- Belt Installation:
- Place new belt looseley on pulleys. Do not pry onto pulleys.
- Tension belt according to manufacturer's instruction.
- Run drive 5 minutes and retension. Belts must be tight enough to prevent slippingwhen drive is fully loaded.
- Reminders :
- Kindly note that actual product color may vary from the images shown.
- Lighting conditions at the time the photo was taken can also affect an image's color.
- For more questions about this product, please don't hesitate to message us.
- Thank you and happy shopping!