• V-Belt Extend
• Part No: V10X750
• Material: Polychloropren (neoprene)
• Colour: Black
• Width (mm): 10
• Length (mm): 750
• Outer Length (mm): 756
• Rotation angle (°): 36

 

• Fibre loaded rubber material provides excellent heat and wear resistance.
• Molded notch construction provides reduced bending stresses around small pulleys.
• Form grinding provides a smooth contact point between the belt surface and the pulleys.

 

• Suitable with:
• SUZUKI
• CARIBIAN
•  Petrol 1L/33KW 1.0 (SJ410) F10A OS All-wheel Drive Open Off-Road Vehicle (09/81-07/91)
•  Petrol 1L/33KW 1.0 (SJ410) F10A All-wheel Drive Closed Off-Road Vehicle (09/81-12/88)

 

• CARRY
•  Petrol 1L/32KW 1.0 F10A FD Rear-Wheel Drive Van (02/99-08/08)
•  Petrol 1L/40KW 1.0 F10A DA5_T,DA6_T,FD Rear-Wheel Drive Platform/Chassis (02/99-09/04)
•  Petrol 1L/40KW 1.0 F10A Rear-Wheel Drive Bus (03/99-09/04)
•  Petrol 1L/33KW 1.0 F10A Rear-Wheel Drive Platform/Chassis (07/85-03/99)
•  
• MERCEDES-BENZ
• S-CLASS
•  Petrol 4.1L/150KW 420 SE, SEL (126.034, 126.035) M 116.965 W126 Rear-Wheel Drive Sedan (10/85-06/91)
•  Petrol 5.5L/220KW 560 SE, SEL M 117.968 W126 Rear-Wheel Drive Sedan (10/85-06/91)

 

• SL
•  Petrol 4.9L/164KW 500 SL (107.046) M 117.964 R107 Rear-Wheel Drive Convertible (01/86-08/89)
•  Petrol 4.9L/180KW 500 SL (107.046) M 117.960,M 117.964 R107 Rear-Wheel Drive Convertible (01/86-08/89)
•  Petrol 4.9L/170KW 500 SL (107.046) M 117.962,M 117.960 R107 Rear-Wheel Drive Convertible (05/80-12/85)

 

• Caution:
• Before any service work on the belt is begun to be sure that the motor or engine is switched off and cannot be started.

 

• Important:
• Check for worn tensioners and idler pulleys. This is the best time to replace these part these parts if needed.

 

• Belt Removal:
• Loosen adjustment or pivot bolts.
• Move adjustment unit to minimum position.
• Remove belt.

 

• Belt Installation:
• Place new belt looseley on pulleys. Do not pry onto pulleys.
• Tension belt according to manufacturer's instruction.
• Run drive 5 minutes and retension. Belts must be tight enough to prevent slippingwhen drive is fully loaded.

 

• Reminders :
• Kindly note that actual product color may vary from the images shown.
• Lighting conditions at the time the photo was taken can also affect an image's color.
• For more questions about this product, please don't hesitate to message us.
• Thank you and happy shopping!